Helix Industrial Sharpening
Bunbury drop-off  ·  Local pickup & delivery  ·  Australia-wide post

Sharpening FAQs, Bunbury WA Common questions
Straight answers.

What we sharpen, what we don’t, and how to get your gear to the Bunbury workshop. If your question isn’t here, ask.
An annular cutter on the grinding wheel at Helix Industrial, Bunbury, sparks flying

What tools do you sharpen?

Five main types: annular cutters, TCT and HSS saw blades, chipper blades, drill bits and countersink bits.

  • Annular cutters for mag drills
  • Saw blades: panel, docking and circular, in TCT and HSS
  • Chipper blades for forestry and timber work
  • Drill bits, in volume or one-offs
  • Countersink bits

Other things come through the shop too: chisels, mincer plates, mower reels and bed knives among them. If it cuts, just ask us.

Do you retooth or re-tip blades?

No. We do sharpening only. If a blade has lost teeth or carbide, it needs a different trade. Send a photo and we’ll tell you straight which one you’re dealing with.

Can you do custom angles?

Yes, on drill bits and annular cutters, as a special request rather than standard. Mention what you need when you get in touch and we’ll sort it out before the job starts.

What condition do tools need to be in?

Dull is fine. That’s the job. Chipped, cracked or missing teeth is a different matter, and so is heat damage that has gone through the steel. Send a photo if you’re unsure and we’ll have a look before you go to the trouble of getting it to us.

How long does it take?

It depends on the job and what’s already on the bench, so we don’t quote a set number of days. Get in touch with what you’ve got and we’ll give you a realistic timeframe before anything starts.

How much does it cost?

Every job is quoted individually. No two blades come in with the same wear, so there’s no price list to publish. Send a photo and a count and you’ll get a figure back.

How do I get my tools to you?

Three ways.

  • Drop off at the workshop in Bunbury, WA 6230
  • Pickup and delivery across the South West
  • Post them in from anywhere in Australia

Get in touch before posting and we’ll send you the address.

Do you work with individuals or only businesses?

Both. Fabrication shops, forestry operations and butchers make up most of the work, but a tradesperson with a handful of drill bits or one blade off the drop saw is just as welcome.

Do you cover all of WA?

The workshop is in Bunbury and pickup and delivery covers the South West. Anywhere else in Australia, post your tools in and we’ll send them back the same way.

Are you insured?

Yes. Helix Industrial Sharpening holds public liability insurance, and a certificate of currency is available on request. Just ask when you get in touch.

Blades lost
their
bite?

Send us a quick pic and the blade count. Sharpening for Bunbury and the South West, with answers that are fast and straight to the point.
Call Jayden
0439 684 417
Or Send An Enquiry
Helix Industrial Sharpening
Call
Bunbury drop-off  ·  Local pickup & delivery  ·  Australia-wide post

Sharpening FAQs, Bunbury WA Common questions
Straight answers.

What we sharpen, what we don’t, and how to get your gear to the Bunbury workshop. If your question isn’t here, ask.

What tools do you sharpen?

Five main types: annular cutters, TCT and HSS saw blades, chipper blades, drill bits and countersink bits.

  • Annular cutters for mag drills
  • Saw blades: panel, docking and circular, in TCT and HSS
  • Chipper blades for forestry and timber work
  • Drill bits, in volume or one-offs
  • Countersink bits

Other things come through the shop too: chisels, mincer plates, mower reels and bed knives among them. If it cuts, just ask us.

Do you retooth or re-tip blades?

No. We do sharpening only. If a blade has lost teeth or carbide, it needs a different trade. Send a photo and we’ll tell you straight which one you’re dealing with.

Can you do custom angles?

Yes, on drill bits and annular cutters, as a special request rather than standard. Mention what you need when you get in touch and we’ll sort it out before the job starts.

What condition do tools need to be in?

Dull is fine. That’s the job. Chipped, cracked or missing teeth is a different matter, and so is heat damage that has gone through the steel. Send a photo if you’re unsure and we’ll have a look before you go to the trouble of getting it to us.

How long does it take?

It depends on the job and what’s already on the bench, so we don’t quote a set number of days. Get in touch with what you’ve got and we’ll give you a realistic timeframe before anything starts.

How much does it cost?

Every job is quoted individually. No two blades come in with the same wear, so there’s no price list to publish. Send a photo and a count and you’ll get a figure back.

How do I get my tools to you?

Three ways.

  • Drop off at the workshop in Bunbury, WA 6230
  • Pickup and delivery across the South West
  • Post them in from anywhere in Australia

Get in touch before posting and we’ll send you the address.

Do you work with individuals or only businesses?

Both. Fabrication shops, forestry operations and butchers make up most of the work, but a tradesperson with a handful of drill bits or one blade off the drop saw is just as welcome.

Do you cover all of WA?

The workshop is in Bunbury and pickup and delivery covers the South West. Anywhere else in Australia, post your tools in and we’ll send them back the same way.

Are you insured?

Yes. Helix Industrial Sharpening holds public liability insurance, and a certificate of currency is available on request. Just ask when you get in touch.

Blades lost their bite?

Send us a quick pic and the blade count. Sharpening for Bunbury and the South West, with answers that are fast and straight to the point.
Tap to call Jayden
0439 684 417 Or Send An Enquiry